DVD Slick Suitable for:
Single, 2-Disc, 3-Disc and 4-Disc cases
Dimensions: 272mm x 183mm at 300dpi
Bleed: 3mm around all edges
DVD Slick Paper Information
MINIMUM = 115 g/m2 (0.0235 lb/f2) THICKNESS 0.09 - 0.10mm (0.0035"-0.0039")
MAXIMUM = 200 g/m2 (0.0408 lb/ft2) THICKNESS 0.15 - 0.16mm (0.0059" - 0.0063")
- Both sides coated
- Scoring is not acceptable
- Product must be supplied flat and free of dirt and paper dust
Download Template here

DVD Slimline Slick for Single Box
Artwork is to be supplied as one of the following formats: Illustrator, EPS, Photoshop, TIFF, PDF or Quark.
Dimensions: 265mm x 183mm @ 300dpi
Bleed: 3mm around all edges v
DVD Slick Paper Information
MINIMUM = 115 g/m2 (0.0235 lb/f2) THICKNESS 0.09 - 0.10mm (0.0035"-0.0039")
MAXIMUM = 200 g/m2 (0.0408 lb/ft2) THICKNESS 0.15 - 0.16mm (0.0059" - 0.0063")
- Both sides coated
- Scoring is not acceptable
- Product must be supplied flat and free of dirt and paper dust
Download Template here
Requirements for Printed Labels
1. Fats Label Specifications
Our thermal labels are printed at 400dpi (400 dots per inch), this is the maximum resolution on our printers, we can adjust print speed and temperature to compensate for most jobs but for "fine" detail, artwork or small print, Laser Labels are recommended.
We can handle both standard spine and face labels, (Please see separate spec sheet for label dimensions) Any rolls of labels supplied to FATS Sydney for a job in less than 200 unit rolls or Labels printed on laser sheets will be treated as a hand pack job and will be factored and priced accordingly. A surcharge is applicable for jobs over 200, using hand-applied labels.
FATS Label program can produce all loaded True type Fonts.
2. Artwork Supplied on Disk
Supplied artwork should be one of the following formats: Illustrator, EPS, PSD, TIFF or PDF. All Label Artwork can also be sent to the FATS Internet E-mail site at:- fatsnsw@fats.com.au
3. Labels
Spine Lables
- Dimensions 135 x 17mm narrow edge leading
- 4mm gap between labels
- Maximum 2.5mm overlap on long side
Face labels
- Dimensions 75 x 45mm narrow edge leading
- 4mm gap between labels
- Maximum 2.5mm overlap on long side
Corporate logos can be dropped into labels. Logos should be supplied as above labels in one colour (black) on white stock printed by Fats colour labels P.O.A Fats can arrange printing of labels if required or can recommend a printer familiar with our requirements.
Pre-printed labels must be in copy position shown for both face and spine

Base stock - raflagloss permanent adhesive RP51 on glassine backing paper.
If labels are to be supplied as flat sheets they should be on sheets of 20 for spine labels & sheets of 12 for face labels. A surcharge will apply for jobs over 200 units using flat sheets labels.
Labels should not be guillotined down to single labels and backing must be cut for peeling.
Minimum quantities for auto packing is 200 units. A surcharge will apply for labels and slicks supplied out of specification.